bristol@mailman.lug.org.uk
To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.lug.org.uk/mailman/listinfo/bristol
or, via email, send a message with subject or body 'help' to
bristol-request@mailman.lug.org.uk
You can reach the person managing the list at
bristol-owner@mailman.lug.org.uk
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Bristol digest..."
Today's Topics:
1. Re: Scanner Driver (Epson V550) (Peter Hemmings)
----------------------------------------------------------------------
Message: 1
Date: Thu, 30 Jun 2016 16:58:51 +0100
From: Peter Hemmings <peternsomerset@virginmedia.com>
To: Dave Addison <dave@redmoor.org.uk>, Bristol and Bath Linux User
Group <bristol@mailman.lug.org.uk>
Subject: Re: [bristol] Scanner Driver (Epson V550)
Message-ID: <1f9c9f24-e353-994f-ed97-891cb7fe5884@virginmedia.com>
Content-Type: text/plain; charset=utf-8; format=flowed
On 30/06/16 12:58, Dave Addison via Bristol wrote:
> Quoting Peter Hemmings via Bristol <bristol@mailman.lug.org.uk>:
>
>> Update
>>
>> On 29/06/16 22:29, Peter Hemmings via Bristol wrote:
>>> Hi,
>>>
>>> I have two separate HD's with fedora23.
>>>
>>> The original scanner works OK BUT I cannot remember how I installed the
>>> driver(s) or what they were and I cannot seem to find any iscan stuff in
>>> a repository.
>>>
>>> Various front ends report no scanner found, but lsusb shows it
>>> connected:
>>> Bus 002 Device 004: ID 04b8:0130 Seiko Epson Corp. GT-X770 [Perfection
>>> V500]
>>>
>>> If I knew what it uses on the one that works then maybe I can manually
>>> install them.
>>>
>>> So, how do I find what driver are used to run the scanner?
>>>
>>> lsmod does not show anything that resembles a "scan" but I assume it
>>> must be listed!?
>>>
>>> Regards
>>
>> Removed "simplescan" "xsane" and checked sane is installed then did a
>> "sane-find-scanner" and it is found.
>>
>> Installed xsane again, and it still is "not connected".
>>
>> Some googling states it was a "group" problem and try running as root,
>> still the same.
>> Even though I installed the driver packagfe from the Epson site I
>> think it is not installed!
>>
>>
>> --
>> Peter H
> Hello Peter
>
> I just installed iscan from this link
>
> http://support.epson.net/linux/en/iscan_c.html
>
> and it seems to work OK for my XP850.
Hmmmmmmmm......
I used the same download page for fedora 64bit.
I vaguely remember problems a while ago and thought the 64bit did not
work so used 32.
What are you using?
Should I be seeing certain modules associated with the H/W as I am not
sure what that epson download puts into the box!?
As I said, I cannot see anything obvious on the one that is working!
What I need to list is the modules that a piece of H/W (Scanner) is
using when it runs.
I know it runs perfectly on the other HD and sane picks it up and even
though I had the S/W iscan on before sane (which epson say is wrong) I
did delete the S/W and reinstalled sane before reinstalling iscan
without success.
I think the scanner should be capable of working but I have done
something wrong.
The scanner works over USB and
> network connections
>
> Regards
> Dave
>
>
> _______________________________________________
> Bristol mailing list
> Bristol@mailman.lug.org.uk
> https://mailman.lug.org.uk/mailman/listinfo/bristol
Regards
--
Peter H
------------------------------
Subject: Digest Footer
_______________________________________________
Bristol mailing list
Bristol@mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/bristol
------------------------------
End of Bristol Digest, Vol 650, Issue 4
***************************************
Tidak ada komentar:
Posting Komentar